Cart

DC800-AL

8" Dust Cap
In stock
SKU
DC800-AL
More Information
Part NumberDC800-AL
MaterialAluminum
Size8"
Working PressureNot For Pressure (Safety Reasons)
HandlesStainless Steel 304
GasketBuna N (Buna Nitrile)
ThreadFemale Coupler End
$91.02

 CLICK HERE for All Dust Cap Sizes

 

  • What it connects to:

  • ● The Female Camlock portion of this coupler will connect to a 8" Male Cam & Groove.

 

  • How the Coupler Works:

  • ● To connect, slide the 8" Female Dust Cap onto a 8" Male Adapter and then close the Cam arms.
  • ● To disconnect, open the Cam Handles and remove the Adapter.

 

  • Description:
  • ● 8" Aluminum Cam and Groove Type DC Dust Cap.
  • Uses:
  • ● The 8" Type DC has a 8" Female Coupler x Sealed Off End and is used to close off and seal 8" Male Adapters with include the Type A, Type F and Type E.
  • ● Used to seal off the line to keep dust and contaminents out and also to prevent leakage.
  • Compatibility:
  • ● 8 inch Type DC Female Camlock portion can connect to a 8 inch Male Camlock of the PTK Style.
  • Installation:
  • ● Connect the Type DC Coupler to a 8" Male Camlock Fitting and close all 4 of the cam arms. (will connect with Type A, F and E)
  • Also Known as a:
  • 8" Female Cam and Groove Dust Cap.
  • ● 8" Type DC Aluminum Camlock Caps.
  • ● 8" Type DC Female Cam Caps.
  • Style:
  • ● 8" PTK Style - Compatible with PT Coupling and with Kuriyama.
  • ● Not Compatible with the larger Neco 8" Style.
  • Applications:
  • ● Buna-Nitrile Rubber Gasket suitable for Fuel Service or Industrial and Commercial Flow Systems.
  • ● For example in petroleum applications, water treatment & water transport, and in waste management systems.
  • ● The 8" Cams are often used for water hose and discharge hose enabling quick connections.
  • Cam Arms:
  • ● 4 x Stainless Steel Handle Arms.
  • Materials:
  • Made out of Aluminum.
  • ● Scroll down to "Related Products" for other Materials.

 

  • Compatibility for 8" Camlocks

  • Since the Mil-Spec standard only applies to sizes from 3/4" up to 4" as well as the 6", there is no standard for the 8" Cam & Groove. As a result there are two styles that are not interchangeable with each other:
  • ● PTK Style - Compatible with Kuriyama and PT Coupling
  • ● Neco Style - Compatible with Dixon (Andrews), Ever-Tite and NECO.
  •  
  • The difference between the PTK and NECO versions:

  • The PTK version has a smaller OD.
  • ● - If the OD of the Male Adapter Portion is less than 9" OD, then it is the PTK Style.
  • ● - If the OD of the Male Adapter is just over 9" OD, then you have the NECO Style.

 

Dimensions:

 

 

Specifications:

More Information
Part NumberDC800-AL
MaterialAluminum
Size8"
Working PressureNot For Pressure (Safety Reasons)
HandlesStainless Steel 304
GasketBuna N (Buna Nitrile)
ThreadFemale Coupler End
Write Your Own Review
You're reviewing:DC800-AL