1-1/2" Pipe Nipple
In stock
SKU
1-1/2" Stainless Steel Pipe Nipple
Part Number | 1-1/2" Threaded Pipe Nipple |
---|---|
Material | Stainless Steel 304 |
Size | 2" to 8" Length |
Working Pressure | Class 150# Fittings |
Thread | 1-1/2" Male NPT |
CLICK HERE for all Pipe Nipple Sizes
- Description:
- ● A 1-1/2" pipe nipple is a 1-1/2" pipe of a specific length, with a 1-1/2" Male NPT thread on either end.
- Uses:
- ● 1-1/2" NPT pipe nipples are an easy way to add a 1-1/2" pipe of various lengths to your application.
- ● They are also used to connect two 1-1/2" fittings at varying distances apart, depending on the length of the nipple.
- ● Used to connect piping to threaded fittings, valves, pumps and other equipment with 1-1/2" Female NPT Threads.
- Installation:
- ● Thread the 1-1/2" Male NPT threaded end into a 1-1/2" Female NPT Thread.
- Classification:
- ● A pipe nipple is classified first according to the size of the pipe thread and then by the legnth of the pipe.
- ● So a 1-1/2" Nipple that is 2" long will be called a 1-1/2" x 2" pipe nipple.
- How to measure length:
- ● A pipe nipple is measured in terms of Over All Length (OAL), this means from end to end including the threads.
- Also Known As a:
- ● 1-1/2" Barrel Nipple
- ● 1-1/2" NPT Pipe Nipple
- ● 1-1/2" Nipple Tubes
- Alternate options:
- ● A alternative are Close Nipples, the only difference being that they are shorter and fully threaded with no unthreaded pipe between the threaded ends.
- ● Another alternative are Hex Nipples which have a hex between the two threaded ends.
- ● Scroll down "Related Products" for more 1-1/2" male threaded nipple options.
- Material:
- ● Stainless Steel 304 (SS 316 available for special order.)
Specifications:
Part Number | 1-1/2" Threaded Pipe Nipple |
---|---|
Material | Stainless Steel 304 |
Size | 2" to 8" Length |
Working Pressure | Class 150# Fittings |
Thread | 1-1/2" Male NPT |
Write Your Own Review
Categories
- Camlock Fittings
- Stainless Steel Ball Valves
- Threaded Fittings
- Sanitary Fittings
- Homebrew Hardware
- Camlock Quick Disconnects
- Brewing Quick Disconnects
- Specials
- Threaded Homebrew Fittings
- 1/2" SS Ball Valve
- Homebrew Pumps
- Brewing Thermometer
- Brew Thermowell
- Homebrew False Bottom
- Sight Glass Brewing
- CIP Spray Balls
- Element Adaptor
- testd
- test2
- Tri-Clamp Pressure Gauge
- Oxygen Stones
- Homebrew Plate Chiller
- Homebrew Tubing
- Camlock Quick Disconnects