ER3020-AL
3" Male Cam x 2" Hose Barb
In stock
SKU
ER3020-AL
Part Number | ER3020-AL |
---|---|
Material | Aluminum |
Size | 3" Male Adapter x 2" Hose Barb |
Working Pressure | 125 PSI |
Gasket | Buna N (Buna Nitrile) |
Thread | 2" Hose Shank |
$12.81
What it connects to:
- ● One side of this 3" x 2" Type ER will connect to a 3" Female Camlock.
- ● The other side of this adapter will install into a 2" Diameter Hose.
How the Adapter Works:
- ● To connect, slide the 3" Male portion into a 3" Female Camlock Adapter and then close the Cam arms.
- ● Slide the Hose Shank portion into a 2" Diameter Hose and fasten with Hose Band Clamps or a Hose Crimp Collar.
- ● To disconnect, open the Cam Handles and remove Adapter.
- Description:
- ● 3" Male Cam and Groove Adapter x 2" Hose Shank.
- Uses:
- ● Used to reduce the size of the Hose Shank of a 3" Type E Male Adapter from 3" down to 2".
- ● Used when increasing or reducing the hose diameter size from 3" to 2".
- ● This Adapter Allows a 3" Female Camlock to connect with a 2" diameter hose.
- What it does:
- ● The camlock portion will connect to a 3" Female Coupler.
- ● The hose shank portion will connect to a 2" diameter hose.
- Also Known as a:
- ● Cam and Groove Type E Jump Size 3" Adapter x 2" Hose Shank.
- ● Type ER Reducer 3" Male Camlock x 2" Hose Shank.
- ● 3" x 2" Type ER Camlock Reducer.
- ● 3" x 2" Reducing Type E.
- Alternate Options:
- ● A Type E with a smaller Hose Shank can also be made using a 3" Type A, a 3" x 2" Reducing Bushing and a 2" Hose Barb.
- ● This Type E Reducer can also be formed by using a 3" Type F, a 3" x 2" Bell Reducer, and a 2" Hose Barb.
- ● This part can also be made using a 3" x 2" Type AR and a 2" KC Nipple or 2" Hose Barb.
- Material:
- ● Aluminum
Specifications:
Part Number | ER3020-AL |
---|---|
Material | Aluminum |
Size | 3" Male Adapter x 2" Hose Barb |
Working Pressure | 125 PSI |
Gasket | Buna N (Buna Nitrile) |
Thread | 2" Hose Shank |
Write Your Own Review