1/2" NPT Same Size Adapter
In stock
SKU
CP050-M/F
Part Number | CP050-M/F |
---|---|
Material | Stainless Steel 304 |
Size | 1/2" |
Working Pressure | Class 150# Fittings |
Thread | 1/2" Male NPT x 1/2" Female NPT |
$5.00
- Description:
- ● 1/2" Male NPT x 1/2" Female NPT Adapter
- Advantage:
- ● This allows you to add a Female NPT thread to your kettle or tank vessel without the need to weld.
- ● The 1/2" Male NPT Threaded portion of this fitting can be turned into a weldless bulkhead so that it can be installed into vessel only by using threads.
- ● All that is required is the 1/2" Weldless Kit.
- Installation:
- ● To install put the Stainless Washer on the male threads of the Same Size Adapter.
- ● Then wrap the male threads with a generous portion of teflon tape and insert it into the hole in the kettle or tank vessel.
- ● And then finally fasten the lock nut and o-ring on the inside of the vessel wall.
- Common Uses:
- ● This Fitting allows you to connect a threaded Brew Thermometer into your tank vessel or kettle with a weldless bulkhead and not have to weld on a coupler.
- Potential Bonus Application:
- ● If you connect this fitting with the Female threads on the inside the tank, and the male threaded portion on the outside the tank, then you could connect a Ball Valve straight onto your kettle with out the need for a Close Nipple. (You may need to use two Washers or two O-rings to get the spacing right.)
- ● This would leave a FNPT thread inside allowing you to connect a Pick up Tube or any other fitting with a MNPT thread to the inside of your kettle.
Specifications:
Part Number | CP050-M/F |
---|---|
Material | Stainless Steel 304 |
Size | 1/2" |
Working Pressure | Class 150# Fittings |
Thread | 1/2" Male NPT x 1/2" Female NPT |
Write Your Own Review
Categories
- Camlock Fittings
- Stainless Steel Ball Valves
- Threaded Fittings
- Check Valves
- Strainers
- Sanitary Fittings
- Homebrew Hardware
- Camlock Quick Disconnects
- Brewing Quick Disconnects
- Specials
- Threaded Homebrew Fittings
- 1/2" SS Ball Valve
- Homebrew Pumps
- Brewing Thermometer
- Brew Thermowell
- Homebrew False Bottom
- Sight Glass Brewing
- CIP Spray Balls
- Element Adaptor
- testd
- test2
- Tri-Clamp Pressure Gauge
- Oxygen Stones
- Homebrew Plate Chiller
- Homebrew Tubing
- Camlock Quick Disconnects