Type DC - Aluminum Camlock Couplings
In stock
SKU
Aluminum Camlock Fittings - Type DC
Part Number | Type DC |
---|---|
Material | Aluminum |
Size | 1/2" to 8" |
Handles | Stainless Steel 304 |
Gasket | Buna N (Buna Nitrile) |
Thread | Female Coupler End |
Pressure Range | Not for Pressure (Safety Reasons) |
CLICK HERE for all Aluminum Camlocks
- ● Dust Caps (DC) can be used with Type A, Type E and Type F adapters to seal the end of the connection.
- ● Will only connect with Male Adapters and are used to seal the line to prevent leakage and to keep dust and contaminants out.
- Description:
- ● The Type DC Female Coupler is a Female Cam and Groove x Dust Cap.
- Uses:
- ● Used to install a Cam Lock Quick Connect Dust Cap onto a Male Cam Adapter.
- ● Used to connect with a Male Adapter of the same size to seal off and keep dust and contaminants out.
- What it connects to:
- ● Will connect to a Male Adapter.
- Installation:
- ● Slide the Type DC Cam Coupler over a Male Cam Fitting and close the two cam handles.
- ● Open the cam arm levers and remove the adapter for a quick disconnect.
- Also Known as:
- ● Type DC Aluminum Cam & Groove Dust Cap.
- ● Type DC Female Cam Caps.
- Sizes:
- ● The Aluminum Type DC Coupling is offered in various sizes from 1/2" up to 8".
- Material:
- ● Made out of Aluminum.
- ● Scroll Down to "Related Products" for other Materials.
Dimensions:
Size(mm) | 3/4 | 1 | 1-1/4 | 1-1/2 | 2 | 2-1/2 | 3 | 4 | 5 | 6 |
B | 34 | 42.5 | 48.5 | 48.5 | 54 | 58 | 61.5 | 63.5 | 66 | 68 |
E | 32.4 | 37.3 | 46 | 54 | 63.8 | 76.5 | 92.2 | 120.2 | 146 | 176.5 |
Aluminum Type DC Coupler Dimensions |
A Type DC Dust Cap can either be used with a Type A, E or F adapter to cap the end of a connection.
Specifications:
Part Number | Type DC |
---|---|
Material | Aluminum |
Size | 1/2" to 8" |
Handles | Stainless Steel 304 |
Gasket | Buna N (Buna Nitrile) |
Thread | Female Coupler End |
Pressure Range | Not for Pressure (Safety Reasons) |
Write Your Own Review
Categories
- Camlock Fittings
- Stainless Steel Ball Valves
- Threaded Fittings
- Check Valves
- Strainers
- Sanitary Fittings
- Homebrew Hardware
- Camlock Quick Disconnects
- Brewing Quick Disconnects
- Specials
- Threaded Homebrew Fittings
- 1/2" SS Ball Valve
- Homebrew Pumps
- Brewing Thermometer
- Brew Thermowell
- Homebrew False Bottom
- Sight Glass Brewing
- CIP Spray Balls
- Element Adaptor
- testd
- test2
- Tri-Clamp Pressure Gauge
- Oxygen Stones
- Homebrew Plate Chiller
- Homebrew Tubing
- Camlock Quick Disconnects