E800-SS
8" Male Cam x 8" Hose Shank
In stock
SKU
E800-SS
Part Number | E800-SS |
---|---|
Material | Stainless Steel 316 |
Size | 8" |
Working Pressure | 150 PSI |
Thread | 8" Hose Barb |
$483.90
CLICK HERE for All Type E Sizes
- Description:
- ● 8" Stainless Steel Cam and Groove Type E Adapter x 8" Hose Shank.
- Uses:
- ● The 8" Type E Male Adapter has an 8" Hose Barb and enables you to install a 8" Male Camlock Hose Coupling into a 8" Diameter Hose.
- Compatibility:
- ● 8" Hose Shank can slide into any 8" diameter hose.
- ● 8 inch Type E Male Camlock portion can connect to a 8 inch Female Camlock of the PTK Style.
- Installation:
- ● Slide the Hose Shank Portion into a 8" Hose and fasten with band clamps or a crimp collar.
- ● Then connect the Type E Adapter to a 8" Female Camlock hose fitting and close all 4 of the cam arms.
- Also Known as a:
- ● Stainless Steel 8" Male Adapter x 8" Hose Shank.
- ● 8" Type E Male Stainless Camlocks.
- ● 8" Type E Stainless Steel Camlocks.
- Style:
- ● 8" PTK Style - Compatible with PT Coupling and with Kuriyama.
- ● Not Compatible with the larger Neco 8" Style.
- Applications:
- ● Buna-Nitrile Rubber Gasket suitable for Fuel Transfer and for Commercial & Industrial Flow Systems.
- ● Examples include water treatment & water transport, waste management systems and in petroleum applications.
- ● The 8" Cams are often used for water hose and discharge hose enabling quick connections.
- Cam Arms:
- ● 4 x Stainless Steel Handle Arms.
- Materials:
- ● Stainless Steel 316.
- ● Scroll down to "Related Product" for other Materials.
Compatibility for 8" Camlocks
- Since the Mil-Spec standard only applies to sizes from 3/4" up to 4" as well as to the 6", there is no standard for the 8" Cam and Groove Couplings. As a result there are two types that are not interchangeable with each other:
- ● PTK Style - Compatible with Kuriyama and PT Coupling
- ● Neco Style - Compatible with Dixon (Andrews), Ever-Tite and NECO.
The difference between the PTK and NECO versions:
- The PTK version has a smaller ID.
- - If the OD of the Male Adapter Portion is less than 9" ID, then it is the PTK Style.
- - If the OD of the Male Adapter is just over 9" ID, then you have the NECO Style.
Dimensions:
Specifications:
Part Number | E800-SS |
---|---|
Material | Stainless Steel 316 |
Size | 8" |
Working Pressure | 150 PSI |
Thread | 8" Hose Barb |
Write Your Own Review
Categories
- Camlock Fittings
- Stainless Steel Ball Valves
- Threaded Fittings
- Check Valves
- Strainers
- Sanitary Fittings
- Homebrew Hardware
- Camlock Quick Disconnects
- Brewing Quick Disconnects
- Specials
- Threaded Homebrew Fittings
- 1/2" SS Ball Valve
- Homebrew Pumps
- Brewing Thermometer
- Brew Thermowell
- Homebrew False Bottom
- Sight Glass Brewing
- CIP Spray Balls
- Element Adaptor
- testd
- test2
- Tri-Clamp Pressure Gauge
- Oxygen Stones
- Homebrew Plate Chiller
- Homebrew Tubing
- Camlock Quick Disconnects